Resources & Insights · OptimumARC

3D Scanning & Geomagic Workflow Insights

Practical guides for engineering teams working with Geomagic software and 3D scan data. The topics we get asked about most, answered from 17 years in the field.

Impeller on a scanning turntable beside a handheld 3D scanner, with its scan and colour deviation map on screen
Articles

What is Worth Reading

Topics engineering teams ask us about most. Straight answers, no obligation.

A scanned car model moving from polygon mesh wireframe to finished surface in Geomagic Wrap
Geomagic

Geomagic Wrap vs Design X: Mesh and Surface Models, or Editable CAD?

Wrap finishes scan data as clean meshes and surfaces; Design X rebuilds it as editable CAD. How to tell which one your work needs.

Read the Guide →
Scan data turned into a SOLIDWORKS model with Geomagic for SOLIDWORKS
Geomagic

Geomagic for SOLIDWORKS vs Design X: Which Scan-to-CAD Tool Fits Your Team?

One works inside SOLIDWORKS, the other is a full reverse engineering tool. Here is how to choose the right one for your team.

Read the Guide →
Geomagic Design X Go, Plus and Pro product boxes in a workshop, with a scanned part on screen behind them
Geomagic

Design X Go vs Plus vs Pro: Which Edition Do You Need?

What each Design X edition includes, which scanners it drives and what it costs, so you buy the right one the first time.

Read the Guide →
A machined part shown half as a faceted scan mesh and half as a solid CAD model, with 3D scanners behind it
Scan to CAD

STL to STEP: When to Convert and When to Rebuild as CAD

Converting an STL to STEP gives you a faceted solid, not editable CAD. When a quick conversion is enough, and when to rebuild.

Read the Guide →
Two monitors on a workshop desk: on the left a scanned pump housing rebuilt as a CAD model, the Design X job; on the right its colour deviation map, the Control X job
Geomagic

Design X vs Control X: Which Geomagic Software Do You Actually Need?

Both are scan-based tools, but they solve different problems. Here is how to choose, and why buying the wrong one is costly.

Read the Guide →
A machined part beside a handheld 3D scanner, with its raw scan mesh and finished CAD model on two monitors
Scan to CAD

Scan to CAD Best Practices: The 5 Pitfalls in Scan-to-CAD Workflows

Scan-to-CAD workflows tend to break down at the same five points. What they are, and how to fix them before your next project.

Read the Guide →
A consultant studying a whiteboard workflow from scan data to mesh, CAD and inspection report, with a laptop and part on the desk
Geomagic

Choosing a Geomagic Partner: Consultant, Reseller or Both?

What a good Geomagic partner does before, during and after a purchase, and the questions to ask before you choose one.

Read the Guide →
A blue-light 3D scanner and a CMM probe measuring the same machined part, each with its result on screen
Metrology

3D Scanning vs CMM: The Right Tool for Dimensional Inspection

CMMs are not going away, but 3D scanning is now accurate enough for most inspection tasks. How to decide which tool to use when.

Read the Guide →

Have a Geomagic or Workflow Question?

Sometimes the fastest answer is a 30-minute conversation. Book a discovery call and we will tackle it directly.

Book a Discovery Call