Every client has a different problem. Same outcome: less time wasted, more accurate results, and a workflow their team runs on its own. Here are ten of them, from aerospace to archaeology.

An automotive team needed one arm scanner for two different jobs. We trained the team over five days on Design X and Control X, using their own parts.
Scanners and software sat idle at an aerospace manufacturer. In four days we trained its team in inspection and reverse engineering on its own parts.
An archaeology team wanted the internal volume of ancient vessels such as pots. We trained the team to measure it from scans in Geomagic Wrap.
A chair maker could scan its curved forms but had no path from scan to CAD. We taught the team to scan well and take the data downstream into CAD.
A Canadian college lab had arms, scanners and three Geomagic products that were largely unused. We trained the team across all three, on their own hardware.
A mining supplier rebuilds worn buckets and liners using two different scanners. We built the scan-to-rework workflow and trained its team to run it.
A healthcare team wanted custom-fit helmets from head CT scans. We trained the team in Geomagic Wrap to turn CT data into clean, design-ready models.
A bottling company could not measure bottle warping or cap failures. We trained its team in Control X, then helped turn the defects into supplier data.
A dental manufacturer ran every scan inspection by hand. In two days on-site we trained its team to automate them with Control X batch tools.
A public art commission needed three heritage surfaces at Fort York reproduced. We captured them on site and delivered watertight surfaces for fabrication.
Every story here started with a team stuck on scan data. Tell us what you are working with, and we will tell you the outcome we would aim for.
Talk to us →Book a 30-minute discovery call and tell us your engineering problem. We will tell you the outcome we would aim for, and how we would get there.
Start the Conversation